FMC must be secured within ______ of each box, cabinet, conduit body, or other conduit termination:

The combined cross sectional area of all conductors or cables must not exceed ______ of the cell or header’s cross sectional area:

______ is the maximum horizontal distance to any receptacles along the floor line of any wall space:

Atleast _____ wall switch controlled lighting outlet shall be installed in every habitable room of a one family dwelling:

The receptacles shall not be located more than _____ above the balcony, deck, or porch surface in one family dwelling:

Outlet boxes that do not enclose devices or utilization equipment must have an internal depth of atleast ______ :

Non metallic sheathed cable must be supported and secured at an intervals not exceeding _____ :

Feeder tap conductors upto 25 ft long are permitted without overcurrent protection at the tap location if the ampacity of the tap conductors must not be less than ______ of the rating of the overcurrent device that protects the feeder:

The overcurrent protection of 14 AWG copper conductors shall not be more than _____:

The circuit conductors that supply several motors must be sized smaller than the sum of the full load current ratings of small motors and _____ of the full load current of the highest rated motor:

A branch circuit short circuit and ground fault protective device provides protection for the motor against overloads:

A minimum clearance of ____ is required between a cell container and any wall or structure on the side not requiring access for maintenance:

Dry type transformers rated not more than ____ are permitted above the suspended ceilings or in hallow spaces of building, if not permanently closed in by the structures: