Service disconnecting means shall not be installed in bathrooms

There shall be not more than ____ sets of disconnects per service grouped in any one location.

One set of service-entrance conductors, either overhead or underground, is permitted to supply ____ service disconnecting means in lieu of a single main disconnect.

The service disconnecting means shall be ____ when it is in ON position:

For installations to supply only limited loads of a single branch circuit, the service disconnecting means shall have a rating of not less than _____.

The service conductors shall not be connected to the service disconnecting means by pressure connectors and clamps:

The connections that depend on solder shall not be used for connecting the terminals of service conductors:

Cable limiters and other current limiting devices shall not be connected to the supply side of the service disconnect:

Systems such as emergency lighting and fire alarms are permitted by to be connected ahead of the normal service disconnecting means only if such systems are provided with a separate disconnecting means and overcurrent protection.

In case of one family dwellings, the service disconnecting means shall have a rating not less than ___

An overcurrent device is required to provide ___ protection in each ungrounded service conductor.

Meter Sockets and meter disconnect switches shall be connected on the load side of the service disconnecting means: